Stainless Steel and Ceramic Fiber Optic Ferrules

Ø1.25 mm or Ø2.5 mm Stainless Steel or Ceramic Ferrules
Various Bore Sizes for Single Mode or Multimode Fiber
Longer Ferrules Useful for Optogenetics Applications
Sold in Packs of 10

CFAF126-10

Ceramic Ferrule with Flange
Ø2.5 mm, 16.0 mm Long (Including Flange)
Ø126 µm Bore

CFLC126-10

Ceramic Ferrule
Ø1.25 mm, 6.4 mm Long
Ø126 µm Bore

Application Idea

Patch Cable with CF270-10 Ferrule
End Mounted in the FCM Ferrule Clamp

SF440-10

Stainless Steel Ferrule
Ø2.5 mm, 12.7 mm Long
Ø440 µm Bore

SFLC230-10

Stainless Steel Ferrule
Ø1.25 mm, 6.4 mm Long
Ø231 µm Bore

CFLF128-10

Ceramic Ferrule with Flange
Ø1.25 mm, 11.8 mm Long (Including Flange)
Ø128 µm Bore

Please Wait

Overview
Feedback
OG Selection Guide

Fiber Connector Selection Guide
Single Mode	Multimode
FC/PC FC/APC ST/PC LC/PC	FC/PC (SS Ferrule) FC/PC (Ceramic Ferrule) FC/APC SMA905 ST/PC
SS and Ceramic Ferrules
Bare Fiber Terminator

MM Fiber Connectorized with a Ceramic Ferrule Mated with our Fiber Optic Cannula with a Mating Sleeve

Click to Enlarge
FT200EMT Multimode Fiber Terminated with CF230-10 Ceramic Ferrule (Sold Assembled as our M81L01 Optogenetics Patch Cable)

Ceramic and Stainless Steel Ferrule Comparison

Click to Enlarge
The cross section is different between the bare stainless steel and ceramic ferrules, and the flanged ceramic ferrules. Each ferrule is defined by bore size, length, and outer diameter.

Features

Ø1.25 mm or Ø2.5 mm Stainless Steel or Ceramic Ferrules
Various Bore Sizes for Single Mode or Multimode Fiber
- Ceramic Ferrules with Ø126 µm - Ø440 µm Bores
- Stainless Steel Ferrules with Ø127 µm - Ø440 µm Bores
Ceramic Ferrules Available with Nickel Plated Brass Flange
Contact Tech Support for Custom Ferrule Length or Bore Size

Thorlabs offers Ø1.25 mm and Ø2.5 mm stainless steel or ceramic (zirconia) fiber optic ferrules for constructing pigtailed fiber optic patch cables and assemblies. Ø1.25 mm LC-sized ferrules are compatible with many LC/PC fiber components, as well as our ADAL1 mating sleeve or ADAL3 interconnect. The standard Ø2.5 mm FC ferrule size is compatible with many FC/PC, SC/PC, and ST^®*/PC fiber components, as well as our ADAF1 mating sleeve or ADAF2 interconnect. Our ceramic ferrules are also available with a nickel plated brass flange that provides a robust way to interface the ferrule with tubing. Both the bare and flanged ferrules are available with extended lengths, making them useful in optogenetics applications by providing additional clearance when implanted alongside other neural recording devices. Additionally, stainless steel ferrules can be scored to increase the available surface area for the bonding agent, while ceramic ferrules are nonmagnetic, making them ideal for applications sensitive to magnetic fields.

Ferrules are sold in packs of 10 and are available with several different bore diameters for either single mode or multimode fibers, as indicated in the tables below.

Thorlabs also stocks multimode patch cables with polished ferrule ends as well as compatible implantable fiber optic cannulae for optogenetics applications (see the OG Selection Guide tab for available products).

Ferrule Selection Guide
Item # Prefix^a	Diameter^b	Length^b	Material^b	Flange	Available Bore Sizes^b	Compatible Mating Sleeves
SFLC	1.25 mm (LC)^c	6.4 mm	Stainless Steel	-	Ø127 - Ø440 µm	ADAL1 ADAL3
CFLC		6.4 mm	Ceramic	-	Ø126 - Ø440 µm
CFX		10.5 mm		-
CFLF		11.8 mm^d		Nickel Plated Brass
SF	2.5 mm (FC)^e	12.7 mm	Stainless Steel	-	Ø230 - Ø440 µm	ADAF1 ADAF2
CF	2.5 mm (FC)^e	10.5 mm	Ceramic	-	Ø126 - Ø440 µm
CFAF	2.5 mm (Conical)^f	16.0 mm^g	Ceramic	Nickel Plated Brass	Ø126 µm

Click the link to be directed to the product series below.
See the diagram to the right for a depiction of the ferrule and bore size dimensions.
SFLC, CFLC, CFX, and CFLF ferrules have PC-polished end faces and are not suitable for APC polishes. These ferrules can be mated to patch cables with LC/PC connectors.
The total length of the flanged ferrule is 11.8 mm. The length of the ceramic ferrule is 4.9 mm, and the length of the nickel plated brass flange is 6.9 mm.
SF and CF ferrules have PC-polished end faces and are not suitable for APC polishes. These ferrules can be mated to patch cables with FC/PC, ST/PC, and SC/PC connectors.
CFAF ferrules have a conical tip to allow for APC polishing after a fiber is installed.
The total length of the flanged ferrule is 16.0 mm. The length of the ceramic ferrule is 8.1 mm, and the length of the nickel plated brass flange is 7.9 mm.

*ST^® is a registered trademark of Lucent Technologies, Inc.

Posted Comments:

Tijmen Godfroid (posted 2023-08-03 12:17:44.653)

Hi, Can you tell me the tollerances on the outerdiamter? So the 1.25? Regards, Tijmen

jdelia (posted 2023-08-03 12:45:59.0)

Thank you for contacting Thorlabs. I have reached out to you directly regarding the outer dimeter tolerance of SFLC127-10.

Chad Bender (posted 2023-07-12 13:50:36.18)

What SS alloy are your ferrules made from?

cdolbashian (posted 2023-07-21 02:52:19.0)

Thank you for reaching out to us Chad. The particular steel used here is 303CU.

li yancheng (posted 2022-06-29 03:25:06.603)

what is the material of the ceramic? isSiO2 or Al2O3 or others? may I see the specification of the ceramic?

cdolbashian (posted 2022-07-06 10:50:06.0)

Thank you for reaching out to us with this material inquiry. For all components made, nominally, of a singular material, the material will be listed in the bottom right corner of the mechanical drawing (Auto Cad Pdf), which is located by clicking the "Docs" icon on the overview page. In this case though, the material is Zirconia.

Bastien des Horts (posted 2022-02-09 03:54:50.837)

Hello, We currently use your ceramic ferrules CF126-10 and CF128-10, which we have cut at a length of 3mm (from the tip from which the fibers are inserted), because our fibers' coating is stripped over a short distance only. Our problem is that since the fiber is only guided over a short distance, it is not well aligned and may move during manipulations. Therefore, we are looking for a ferrule with a first bore diameter of 128um (that part doesn't change) over a distance close to 2mm, followed by a second bore of 160um (to guide the coated part) over a longer distance (about 8mm would be nice). I've seen that you offer stainless steel ferrules with two different bore diameters, but they do not correspond to our needs. Would it be possible to make a ferrule that matches our needs ? We do not have a material preference. Thank you very much.

jgreschler (posted 2022-02-16 12:32:01.0)

Thank you for reaching out to Thorlabs. We are able to provide a degree of customization with our stainless steel ferrules. I have reached out to you directly to discuss this further.

Peter Moselund (posted 2021-08-10 08:16:22.42)

You note the bore size tolerance, but what is the typical concentricity tolerance of your various ferrules?

cdolbashian (posted 2021-08-27 09:41:53.0)

Thank you for contacting us at Thorlabs. The concentricity generally depends on the specific ferrule, and material. Ceramic ferrules tend to have a better concentricity, but without knowing a specific part number we cannot comment on a general concentricity. I have reached out to you directly to inquire about which model, specifically, you are interested in learning about.

Rebecca Brown (posted 2020-05-25 01:16:42.767)

Hi there, I am looking to purchase some custom stainless steel ferrules. 10.5mm long (or the closest standard size in stainless steel to this) 550um bore Could I please get an indication of time and cost for these parts? They would be delivered to Sydney, Australia. Thanks, Rebecca

YLohia (posted 2020-05-26 11:07:01.0)

Hello Rebecca, thank you for contacting Thorlabs. Custom ferrules can be requested by emailing our Tech Support team at techsupport@thorlabs.com.

chiwon.lee (posted 2017-01-25 06:55:25.973)

Hello, I'm using a multimode fiber (FG105ACA) with core/cladding diameter of 105um/250um, and thinking to connectorize it to the 2.5mm ceramic ferrule. It seems that the item CF128-10 is compatible with the FG105UCA fiber that has the same core/cladding diameter with mine. Could you check if this ferrule works for my fiber? Thank you.

tfrisch (posted 2017-01-26 05:26:50.0)

Hello, thank you for contacting Thorlabs. FG105ACA actually has a cladding diameter of 125um, so the 128um bore of CF128-10 would be best, yes. The coating (250um) should be stripped off prior to connectorization.

cr2581 (posted 2016-04-20 16:00:13.1)

Hello, We currently use your stainless steel ferrules (SFLC230-10) and I wanted to offer a suggested variation on it. We find that they are difficult to work with because they are too short. Therefore, we end up glueing two together with a sleeve to double the length. It would be nice if you offered the 1.25 mm ferrules also at a longer length (12 mm). It seems that this would be easy to manufacture and would be very helpful to us and others.

besembeson (posted 2016-04-21 01:38:21.0)

Response from Bweh at Thorlabs USA: We can offer this to you as a special item for now. I will contact you to know your quantity requirements.

pain (posted 2014-07-08 11:19:06.86)

Could thoralbs provide with empty ceramic ferule with 1mm ID and standard 2.5 OD ?

jlow (posted 2014-07-14 11:34:04.0)

Response from Jeremy at Thorlabs: We do not have the ceramic ferrule with 1mm ID. We can provide this with stainless steel ferrule.

RLopes (posted 2014-01-23 18:47:23.77)

We need to machine some features on this part, but have been unable because it is the fired ceramic. Can you supply this part before the ceramic firing process? OR... could you advise on a machining process/tooling requirements so we can machine the part as provided?

jlow (posted 2014-01-29 04:21:17.0)

Response from Jeremy at Thorlabs: We do not supply ceramic before the firing process at the moment. Machining zirconia ceramic would typically require the use of diamond cutting tools.

ma.dmitry (posted 2013-07-02 13:11:04.923)

According to the response on the previous question, Thorlabs can provide stainless steel ferrules with various ID and 2.5 or 1.25 mm OD. But could you manufacture and sell stainless steel ferrules with various OD. I am interested in stainless steel ferrules with OD 750 um (or even less) and ID 250 um. If so, what is the less possible OD?

pbui (posted 2013-07-03 15:00:00.0)

Response from Phong at Thorlabs: Thorlabs can certainly provide custom sized stainless steel ferrules with various lengths and ODs. We will contact you directly to discuss your requirements.

jjiang (posted 2013-04-25 00:33:15.033)

Does thorlab sell empty stainless steel ferrule with different hole size?

tcohen (posted 2013-04-25 12:42:00.0)

Response from Tim at Thorlabs: We can provide 2.5mm OD or 1.25mm OD stainless steel ferrules of various ID. We will contact you to discuss your dimensional requirements.

Quick Links
Single-Site Stimulation
One Light Source to One Cannula Implant
Multilateral Stimulation
One Light Source to Two Cannula Implants Using Rotary Joint Splitter
One or Two Light Sources to Two Cannula Implants
One Light Source to Seven Cannula Implants
Two Light Sources into One Dual-Core Cannula Implant
Illumination
Fiber-Coupled LEDs and Drivers

Optogenetics Selection Guide

Thorlabs offers a wide range of optogenetics components; the compatibility of these products in select standard configurations is discussed in detail here. Please contact Technical Support for assistance with items outside the scope of this guide, including custom fiber components for optogenetics.

Single-Site Stimulation

One Light Source to One Cannula Implant

The most straightforward method for in vivo light stimulation of a specimen is to use a single fiber optic with a single LED light source. The single wavelength LED is powered by an LED driver, and then the illumination output is fiber-coupled into a patch cable, which connects to the implanted cannula. See the graphics and expandable compatibility tables below for the necessary patch cables and cannulae to create this setup. To choose the appropriate LED and driver, see below or the full web presentation.

Click on Each Component for More Information

Click for Details

Click to See Ø1.25 mm (LC) Ferrule Compatible Patch Cables, Cannulae, and Interconnects

Component Selection Table (Click Links for Item Description Popup)
Fiber Type		FG105LCA	FG200UCC	FT200EMT	FP200URT	FT400EMT	FP400URT
Fiber Type Specs	Core Diameter	105 µm	200 µm			400 µm
	Wavelength Range	400 - 2400 nm	250 - 1200 nm	400 - 2200 nm	300 - 1200 nm	400 - 2200 nm	300 - 1200 nm
	NA	0.22	0.22	0.39	0.50	0.39	0.50
Patch Cables^b	Standard FC/PC Input	M61L01	M86L005 M86L01	M83L01 MR83L01	M73L01	M99L01	M127L01
	Standard SMA905 Input	M63L01	M87L005 M87L01	M89L01 MR89L01	M95L01	M98L01	M125L01
	Rotary Joint FC/PC Input	-	-	RJPFL2	-	RJPFL4	-
	Rotary Joint SMA905 Input	-	-	RJPSL2	-	RJPSL4	-
Compatible Mating Sleeve/Interconnect		ADAL1, ADAL3, or ADAL4-5
Fiber Optic Cannulae^c	Ceramic 6.4 mm Long Ferrule	CFMLC21L02 CFMLC21L05 CFMLC21L10 CFMLC21L20 CFMLC21U-20	CFMLC22L02 CFMLC22L05 CFMLC22L10 CFMLC22L20 CFMLC22U-20	CFMLC12L02 CFMLC12L05 CFMLC12L10 CFMLC12L20 CFMLC12U-20	CFMLC52L02 CFMLC52L05 CFMLC52L10 CFMLC52L20 CFMLC52U-20	CFMLC14L02 CFMLC14L05 CFMLC14L10 CFMLC14L20 CFMLC14U-20	CFMLC15L02 CFMLC15L05 CFMLC15L10 CFMLC15L20
	Diffuser Tip (Ceramic 6.4 mm Long Ferrule)	-	-	CFDSB02 CFDSB05 CFDSB10 CFDSB20	-	-	-
	Ceramic 10.5 mm Long Ferrule	-	CFMXA02 CFMXA05 CFMXA10 CFMXA20	CFMXB02 CFMXB05 CFMXB10 CFMXB20	CFMXC02 CFMXC05 CFMXC10 CFMXC20	-	CFMXD02 CFMXD05 CFMXD10 CFMXD20
	Stainless Steel 6.4 mm Long Ferrule	CFML21L02 CFML21L05 CFML21L10 CFML21L20 CFML21U-20	CFML22L02 CFML22L05 CFML22L10 CFML22L20 CFML22U-20	CFML12L02 CFML12L05 CFML12L10 CFML12L20 CFML12U-20	CFML52L02 CFML52L05 CFML52L10 CFML52L20 CFML52U-20	CFML14L02 CFML14L05 CFML14L10 CFML14L20 CFML14U-20	CFML15L02 CFML15L05 CFML15L10 CFML15L20
Items are compatible with each other when they are comprised of the same fiber type and listed in the same column. Patch cables for single source to single implant applications are highlighted in green above. Choose a patch cable with an input that matches your light source. Available cannulae are highlighted in orange of the table above. Cannulae within the same column are interchangeable.

Click for Detials

Click to See Ø2.5 mm (FC) Ferrule Compatible Patch Cables, Cannulae, and Interconnects

Component Selection Table (Click Links for Item Description Popup)
Fiber Type		FG200UCC	FT200EMT	FP200URT	FT300EMT	FT400EMT	FP400URT
Fiber Type Specs	Core Diameter	200 µm			300 µm	400 µm
	Wavelength Range	250 - 1200 nm	400 - 2200 nm	300 - 1200 nm	400 - 2200 nm	400 - 2200 nm	300 - 1200 nm
	NA	0.22	0.39	0.50	0.39	0.39	0.50
Patch Cables^b	Standard FC/PC Input	M80L005 M80L01	M81L005 M81L01 MR81L01	M104L01	M56L005 M56L01	M82L005 M82L01	M128L01
	Standard SMA905 Input	M84L005 M84L01	M77L005 M77L01 MR77L01	M106L01	M58L005 M58L01	M79L005 M79L01	M126L01
	Rotary Joint FC/PC Input	-	RJAFF2 RJPFF2	-	-	RJPFF4	-
	Rotary Joint SMA905 Input	-	RJASF2 RJPSF2	-	-	RJPSF4	-
Compatible Mating Sleeve/Interconnect		ADAF1, ADAF2, or ADAF4-5
Fiber Optic Cannulae^c	Ceramic 10.5 mm Long Ferrule	CFMC22L02 CFMC22L05 CFMC22L10 CFMC22L20 CFMC22U-20	CFMC12L02 CFMC12L05 CFMC12L10 CFMC12L20 CFMC12U-20	CFMC52L02 CFMC52L05 CFMC52L10 CFMC52L20 CFMC52U-20	CFMC13L02 CFMC13L05 CFMC13L10 CFMC13L20	CFMC14L02 CFMC14L05 CFMC14L10 CFMC14L20 CFMC14U-20	CFMC54L02 CFMC54L05 CFMC54L10 CFMC54L20
Fiber Optic Cannulae^c	Stainless Steel 12.7 mm Long Ferrule	CFM22L02 CFM22L05 CFM22L10 CFM22L20 CFM22U-20	CFM12L02 CFM12L05 CFM12L10 CFM12L20 CFM12U-20	CFM52L02 CFM52L05 CFM52L10 CFM52L20 CFM52U-20	CFM13L02 CFM13L05 CFM13L10 CFM13L20	CFM14L02 CFM14L05 CFM14L10 CFM14L20 CFM14U-20	CFM15L02 CFM15L05 CFM15L10 CFM15L20
Items are compatible with each other when they are comprised of the same fiber type and listed in the same column. Patch cables for single source to single implant applications are highlighted in green above. Choose a patch cable with an input that matches your light source. Available cannulae are highlighted in orange of the table above. Cannulae within the same column are interchangeable.

Multilateral Stimulation

The ability to accurately and simultaneously direct light to multiple locations within a specimen is desired for many types of optogenetics experiments. For example, bilateral stimulation techniques typically target neurons in two spatially separated regions in order to induce a desired behavior. In more complex experiments involving the simultaneous inhibition and stimulation of neurons, delivering light of two different monochromatic wavelengths within close proximity enables the user to perform these experiments without implanting multiple cannulae, which can increase stress on the specimen.

Multilateral stimulation can be achieved with several different configurations depending on the application requirements. The sections below illustrate examples of different configurations using Thorlabs' optogenetics products.

Option 1: One Light Source to Two Cannula Implants Using Rotary Joint Splitter

Thorlabs' RJ2 1x2 Rotary Joint Splitter is designed for optogenetics applications and is used to split light from a single input evenly between two outputs. The rotary joint interface allows connected patch cables to freely rotate, reducing the risk of fiber damage caused by a moving specimen. See the graphic and compatibility table below for the necessary cables and cannulae to create this setup. For LEDs and drivers, see below or the full web presentation.

Click for Details

Click to See Ø1.25 mm (LC) Ferrule Components Recommended for Use with RJ2 Rotary Joint Splitter

Component Selection Table (Click Links for Item Description Popup)
Common Fiber Properties
Fiber Properties	Core Diameter	200 µm			400 µm
	Wavelength Range^a	400 - 700 nm	400 - 700 nm	400 - 700 nm	400 - 700 nm	400 - 700 nm
	NA	0.22	0.39	0.50	0.39	0.50
Input Patch Cables^b	Standard FC/PC Connectors	M122L01 M122L02 M122L05	M72L01 M72L02 M72L05	M123L01 M123L02	M74L01 M74L02 M74L05	M124L01 M124L02
Input Patch Cables^b	Hybrid SMA905 to FC/PC	M36L01	M75L01 M75L02	M129L01 M129L02	M76L01 M76L02	M131L01 M131L02
Rotary Joint		RJ2
Output Patch Cables	FC/PC to Ø1.25 mm (LC) Ferrule	M86L005 M86L01	M83L01 MR83L01	M73L01	M99L01	M127L01
Compatible Mating Sleeve/Interconnect		ADAL1, ADAL3, or ADAL4-5
Fiber Optic Cannulae^c	Ceramic 6.4 mm Long Ferrule	CFMLC22L02 CFMLC22L05 CFMLC22L10 CFMLC22L20 CFMLC22U-20	CFMLC12L02 CFMLC12L05 CFMLC12L10 CFMLC12L20 CFMLC12U-20	CFMLC52L02 CFMLC52L05 CFMLC52L10 CFMLC52L20 CFMLC52U-20	CFMLC14L02 CFMLC14L05 CFMLC14L10 CFMLC14L20 CFMLC14U-20	CFMLC15L02 CFMLC15L05 CFMLC15L10 CFMLC15L20
	Diffuser Tip (Ceramic 6.4 mm Long Ferrule)	-	CFDSB02 CFDSB05 CFDSB10 CFDSB20	-	-	-
	Ceramic 10.5 mm Long Ferrule	CFMXA02 CFMXA05 CFMXA10 CFMXA20	CFMXB02 CFMXB05 CFMXB10 CFMXB20	CFMXC02 CFMXC05 CFMXC10 CFMXC20	-	CFMXD02 CFMXD05 CFMXD10 CFMXD20
	Stainless Steel 6.4 mm Long Ferrule	CFML22L02 CFML22L05 CFML22L10 CFML22L20 CFML22U-20	CFML12L02 CFML12L05 CFML12L10 CFML12L20 CFML12U-20	CFML52L02 CFML52L05 CFML52L10 CFML52L20 CFML52U-20	CFML14L02 CFML14L05 CFML14L10 CFML14L20 CFML14U-20	CFML15L02 CFML15L05 CFML15L10 CFML15L20
Products in each column can be used with each other over the indicated wavelength range and is limited by the operating range of the RJ2 Rotary Joint Splitter. Individual products may be used outside this range; see product information for detailed specifications. Use a standard FC/PC patch cable to connect to an FC/PC-terminated light source. SMA905 to FC/PC hybrid patch cables should be used to connect to an SMA905-terminated light source. Available cannulae are highlighted in orange of the table above. Cannulae within the same column are interchangeable.

Click for Detials

Click to See Ø2.5 mm (FC) Ferrule Components Recommended for Use with RJ2 Rotary Joint Splitter

Component Selection Table (Click Links for Item Description Popup)
Common Fiber Properties
Fiber Properties	Core Diameter	200 µm			300 µm	400 µm
	Wavelength Range^a	400 - 700 nm	400 - 700 nm	400 - 700 nm	400 - 700 nm	400 - 700 nm	400 - 700 nm
	NA	0.22	0.39	0.50	0.39	0.39	0.50
Input Patch Cables	Standard FC/PC Connectors	M122L01 M122L02 M122L05	M72L01 M72L02 M72L05	M123L01 M123L02	M56L005 M56L01	M74L01 M74L02 M74L05	M124L01 M124L02
Input Patch Cables	Hybrid SMA905 to FC/PC	M36L01	M75L01 M75L02	M129L01 M129L02	M58L005 M58L01	M76L01 M76L02	M131L01 M131L02
Rotary Joint		RJ2
Output Patch Cables	FC/PC to Ø2.5 mm (FC) Ferrule	M80L005 M80L01	M81L005 M81L01 MR81L01	M104L01	M56L005 M56L01	M82L005 M82L01	M128L01
Compatible Mating Sleeve/Interconnect		ADAF1, ADAF2, or ADAF4-5
Fiber Optic Cannulae^c	Ceramic 10.5 mm Long Ferrule	CFMC22L02 CFMC22L05 CFMC22L10 CFMC22L20 CFMC22U-20	CFMC12L02 CFMC12L05 CFMC12L10 CFMC12L20 CFMC12U-20	CFMC52L02 CFMC52L05 CFMC52L10 CFMC52L20 CFMC52U-20	CFMC13L02 CFMC13L05 CFMC13L10 CFMC13L20	CFMC14L02 CFMC14L05 CFMC14L10 CFMC14L20 CFMC14U-20	CFMC54L02 CFMC54L05 CFMC54L10 CFMC54L20
Fiber Optic Cannulae^c	Stainless Steel 12.7 mm Long Ferrule	CFM22L02 CFM22L05 CFM22L10 CFM22L20 CFM22U-20	CFM12L02 CFM12L05 CFM12L10 CFM12L20 CFM12U-20	CFM52L02 CFM52L05 CFM52L10 CFM52L20 CFM52U-20	CFM13L02 CFM13L05 CFM13L10 CFM13L20	CFM14L02 CFM14L05 CFM14L10 CFM14L20 CFM14U-20	CFM15L02 CFM15L05 CFM15L10 CFM15L20
Products in each column can be used with each other over the indicated wavelength range and is limited by the operating range of the RJ2 Rotary Joint Splitter. Individual products may be used outside this range; see product information for detailed specifications. Use a standard FC/PC patch cable to connect to an FC/PC-terminated light source. SMA905 to FC/PC hybrid patch cables should be used to connect to an SMA905-terminated light source. Available cannulae are highlighted in orange of the table above. Cannulae within the same column are interchangeable.

Option 2: One or Two Light Sources to Two Cannula Implants

If the intent is for one LED source to connect to two cannulae for simultaneous light modulation, then a bifurcated fiber bundle can be used to split the light from the LED into each respective cannula. For dual wavelength stimulation (mixing two wavelengths in a single cannula) or a more controlled split ratio between cannula, one can use a multimode coupler to connect one or two LEDs to the cannulae. If one cable end is left unused, the spare coupler cable end may be terminated by a light trap. See the graphic and compatibility table below for the necessary cables and cannulae to create this setup. For LEDs and drivers, see below or the full web presentation.

Click on Each Component Below for More Information

Click to see Compatible Fiber Bundles, Coupler/Splitters, Cannulae, and Interconnects

Part Selection Table (Click Links for Item Description Popup)
Common Fiber Properties
Core Diameter		105 µm	200 µm						400 µm
Wavelength Range		400 - 2200 nm^a	400 - 1200 nm^a		400 - 900 nm^a				400 - 2200 nm
NA		0.22	0.22		0.39		0.50		0.39
Ferrule Style^b		LC (Ø1.25 mm)	LC (Ø1.25 mm)	FC (Ø2.5 mm)	LC (Ø1.25 mm)	FC (Ø2.5 mm)	LC (Ø1.25 mm)	FC (Ø2.5 mm)	LC (Ø1.25 mm)	FC (Ø2.5 mm)
Bifurcated Y-Cable^c	FC/PC Input	-	BFYL1LF01	BFYF1LF01	BFYL2LF01	BFYF2LF01	-	-	BFYL4LF01	BFYF4LF01
Bifurcated Y-Cable^c	SMA905 Input	-	BFYL1LS01	BFYF1LS01	BFYL2LS01	BFYF2LS01	-	-	BFYL4LS01	BFYF4LS01
1x2 Multimode Coupler^c	FC/PC Input	TM105FL1B	TM200FL1B	TM200FS1B	TT200FL1A	TT200FS1A	TH200FL1A	TH200FS1A	-	-
1x2 Multimode Coupler^c	SMA905 Input	TM105SL1B	TM200SL1B	TM200SS1B	TT200SL1A	TT200SS1A	TH200SL1A	TH200SS1A	-	-
2x2 Multimode Coupler^c	FC/PC Input	-	-	-	TT200FL2A	TT200FS2A	-	-	-	-
2x2 Multimode Coupler^c	SMA905 Input	-	-	-	TT200SL2A	TT200SS2A	-	-	-	-
Compatible Mating Sleeve/Interconnect		ADAL1 ADAL3 ADAL34-5	ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5	ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5	ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5	ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5
Fiber Optic Cannulae^d	Ceramic 6.4 mm Long Ferrule	CFMLC21L02 CFMLC21L05 CFMLC21L10 CFMLC21L20 CFMLC21U-20	CFMLC22L02 CFMLC22L05 CFMLC22L10 CFMLC22L20 CFMLC22U-20	-	CFMLC12L02 CFMLC12L05 CFMLC12L10 CFMLC12L20 CFMLC12U-20	-	CFMLC52L02 CFMLC52L05 CFMLC52L10 CFMLC52L20 CFMLC52U-20	-	CFMLC14L02 CFMLC14L05 CFMLC14L10 CFMLC14L20 CFMLC14U-20	-
	Diffuser Tip (Ceramic 6.4 mm Long Ferrule)	-	-	-	CFDSB02 CFDSB05 CFDSB10 CFDSB20	-	-	-	-	-
	Ceramic 10.5 mm Long Ferrule	-	CFMXA02 CFMXA05 CFMXA10 CFMXA20	CFMC22L02 CFMC22L05 CFMC22L10 CFMC22L20 CFMC22U-20	CFMXB02 CFMXB05 CFMXB10 CFMXB20	CFMC12L02 CFMC12L05 CFMC12L10 CFMC12L20 CFMC12U-20	CFMXC02 CFMXC05 CFMXC10 CFMXC20	CFMC52L02 CFMC52L05 CFMC52L10 CFMC52L20 CFMC52U-20	-	CFMC14L02 CFMC14L05 CFMC14L10 CFMC14L20 CFMC14U-20
	Stainless Steel	CFML21L02 CFML21L05 CFML21L10 CFML21L20 CFML21U-20	CFML22L02 CFML22L05 CFML22L10 CFML22L20 CFML22U-20	CFM22L02 CFM22L05 CFM22L10 CFM22L20 CFM22U-20	CFML12L02 CFML12L05 CFML12L10 CFML12L20 CFML12U-20	CFM12L02 CFM12L05 CFM12L10 CFM12L20 CFM12U-20	CFML52L02 CFML52L05 CFML52L10 CFML52L20 CFML52U-20	CFM52L02 CFM52L05 CFM52L10 CFM52L20 CFM52U-20	CFML14L02 CFML14L05 CFML14L10 CFML14L20 CFML14U-20	CFM14L02 CFM14L05 CFM14L10 CFM14L20 CFM14U-20

Products in this column can be used with each other over the indicated wavelength range. Individual products may be used outside this range; see product information for detailed specifications.
LC components have a Ø1.25 mm ferrule end while FC components have a Ø2.5 mm ferrule end. Items listed in the same "Ferrule Style" column are compatible with each other.
Optogenetics products for one or two light sources to two cannula implant applications are highlighted in green above. Choose a component with an input that matches your light source.
Available cannulae are highlighted in orange of the table above. Cannule within the same column are interchangeable.

Option 3: One Light Sources to Seven Cannula Implants

If the intent is for one LED source to connect to seven cannulae for simultaneous light modulation, then a 1-to-7 fiber bundle can be used to split the light from the LED into each respective cannula. See the graphic and compatibility table below for the necessary cables and cannulae to create this setup. For LEDs and drivers, see below or the full web presentation.

Click on Each Component Below for More Information

Click to see Compatible Fiber Bundles, Coupler/Splitters, Cannulae, and Interconnects

Part Selection Table (Click Links for Item Description Popup)
Common Fiber Properties
Core Diameter		200 µm
Wavelength Range		250 - 1200 nm^a		400 - 2200 nm^a
NA		0.22 ± 0.02		0.39
Ferrule Style^b		LC (Ø1.25 mm)	FC (Ø2.5 mm)	LC (Ø1.25 mm)	FC (Ø2.5 mm)
1-to-7 Bundle^c	SMA905 Input	BF7L1LS1	BF7F1LS1	BF7L2LS1	BF7F2LS1
Compatible Mating Sleeve/Interconnect		ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5	ADAL1 ADAL3 ADAL4-5	ADAF1 ADAF2 ADAF4-5
Fiber Optic Cannulae^d	Ceramic 6.4 mm Long Ferrule	CFMLC22L02 CFMLC22L05 CFMLC22L10 CFMLC22L20 CFMLC22U-20	-	CFMLC12L02 CFMLC12L05 CFMLC12L10 CFMLC12L20 CFMLC12U-20	-
	Diffuser Tip (Ceramic 6.4 mm Long Ferrule)	-	-	CFDSB02 CFDSB05 CFDSB10 CFDSB20	-
	Ceramic 10.5 mm Long Ferrule	CFMXA02 CFMXA05 CFMXA10 CFMXA20	CFMC22L02 CFMC22L05 CFMC22L10 CFMC22L20 CFMC22U-20	CFMXB02 CFMXB05 CFMXB10 CFMXB20	CFMC12L02 CFMC12L05 CFMC12L10 CFMC12L20 CFMC12U-20
	Stainless Steel	CFML22L02 CFML22L05 CFML22L10 CFML22L20 CFML22U-20	CFM22L02 CFM22L05 CFM22L10 CFM22L20 CFM22U-20	CFML12L02 CFML12L05 CFML12L10 CFML12L20 CFML12U-20	CFM12L02 CFM12L05 CFM12L10 CFM12L20 CFM12U-20

Products in this column can be used with each other over the indicated wavelength range. Individual products may be used outside this range; see product information for detailed specifications.
LC components have a Ø1.25 mm ferrule end while FC components have a Ø2.5 mm ferrule end. Items listed in the same "Ferrule Style" column are compatible with each other.
Optogenetics products for one or two light sources to two cannula implant applications are highlighted in green above. Choose a component with an input that matches your light source.
Available cannulae are highlighted in orange of the table above. Cannule within the same column are interchangeable.

Two Light Sources into One Dual-Core Cannula Implant

For bilateral stimulation applications where the two cannulas need to be placed in close proximity (within ~1 mm), Thorlabs offers dual-core patch cables and cannulae that are designed for this specific application. Each core is driven by a separate light source, enabling users to stimulate and/or supress nerve cells in the same region of the specimen. See the graphic and compatibility table below for the necessary cables and cannulae to create this setup. For LEDs and drivers, see below or the full web presentation.

Click on Each Component for More Information

Part Selection Table (Click Links for Item Description Popup)
Common Fiber Properties
Core Diameter		200 µm
Wavelength Range		400 - 2200 nm
NA		0.39
Fiber Type		FT200EMT
Ferrule Style^a		FC (Ø2.5 mm)
Dual-Core Patch Cable	FC/PC Input	BFY32FL1
Dual-Core Patch Cable	SMA905 Input	BFY32SL1
Compatible Mating Sleeve/Interconnect		ADAF1 ADAF2 ADAF4-5
Dual-Core Fiber Optic Cannulae^c	Stainless Steel	CFM32L10 CFM32L20

FC components have a Ø2.5 mm ferrule end.
Patch cables for dual light source to single implant applications are highlighted in green above. Choose a patch cable with an input that matches your light source.
Available cannulae are highlighted in orange of the table above. Cannule within the same column are interchangeable.

LED Item #	Wavelength^a	Typical Opsin	Output Power^b	Color
M405F3^c	405 nm	mmilCFP, hcriGFP	3.7 mW	UV
M430F1	430 nm	ChR2	7.5 mW	Violet
M455F3	455 nm	ChIEF, bPAC	24.5 mW	Royal Blue
M470F4	470 nm	ChR2, ChR2-SFO	20 mW	Blue
M490F4	490 nm	Rh-CT, ChR2 (E123A)	2.8 mW	Blue
M505F3	505 nm	ChRGR, Opto-α1AR, Opto-β2AR	11.7 mW	Cyan
M530F3	530 nm	C1V1, VChR1	9.6 mW	Green
M565F3	565 nm	Arch, VChR1-SFO	13.5 mW	Lime
M595F2	595 nm	ChR2-SFO, eNpHR3.0	11.5 mW	Amber
M625F2	625 nm	ReChR	17.5 mW	Red

Click the link for a spectrum and raw data.
Typical output power measured with a Ø400 µm Core, 0.39 NA multimode fiber.
Precautions must be taken to prevent looking directly at the UV light and UV light protective glasses must be worn to avoid eye damage. Exposure of the skin and other body parts to UV light should be avoided.

Illumination

Click to Enlarge
M405F1

Fiber-Coupled LEDs and Drivers

Our fiber-coupled LEDs are ideal light sources for optogenetics applications. They feature a variety of wavelength choices and a convenient interconnection to optogenetics patch cables. Thorlabs offers fiber-coupled LEDs with nominal wavelengths ranging from 280 nm to 1050 nm. See the table to the right for the LEDs with the most popular wavelengths for optogenetics. A table of compatible LED drivers can be viewed by clicking below.

Click to See Compatible LED Drivers

Compatible Drivers^a	UPLED^b	LEDD1B^c	DC2200^b	DC4100^b,d,e	DC4104^b,d,e
Click Photos to Enlarge
Main Driver Features	USB-Controlled	Very Compact Footprint 60 mm x 73 mm x 104 mm (W x H x D)	Touchscreen Interface with Internal and External Options for Pulsed and Modulated LED Operation	4 Channels^d	4 Channels^d
LED Driver Current Output (Max)	1.2 A	1.2 A	LED1 Terminal: 10.0 A LED2 Terminal: 2.0 A^f	1.0 A per Channel	1.0 A per Channel
LED Driver Forward Voltage (Max)	8 V	12 V	50 V	5 V	5 V
Modulation Frequency	-	0 to 5 kHz (External)	20 to 100 kHz (Internal)^h DC to 250 kHz (External)^g,h	0 to 100 kHz (External)^h Simultaneous Across all Channels	0 to 100 kHz (External)^h Independently Controlled Channels
External Control Interface(s)	USB 2.0	Analog (BNC)	USB 2.0 and Analog (BNC)	USB 2.0 and Analog (BNC)	USB 2.0 and Analog (8-Pin)
EEPROM Compatible: Reads Out LED Data for LED Settings		-
LCD Display	-	-

Click on the item number link to view the complete presentation for each controller.
Automatically limits to LED's max current via EEPROM readout.
The preferred power supply (single channel or hub-based) depends on the end user's application and whether you already own compatible power supplies. To that end and in keeping with Thorlabs' green initiative, we do not ship the LEDD1B bundled with a power supply. This avoids the cost and inconvenience of receiving an unwanted single-channel supply if a hub-based system (Item # KCH301 or KCH601) would be more appropriate.
The DC4100 and DC4104 can power and control up to four LEDs simultaneously when used with the DC4100-HUB. The fiber-coupled LEDs on this page all require the DC4100-HUB when used with the DC4100 or DC4104.
These LED drivers have a maximum forward voltage rating of 5 V and can provide a maximum current of 1000 mA. As a result, they cannot be used to drive LEDs which have forward voltage ratings greater than 5 V. LEDs with maximum current ratings higher than 1.0 A can be driven using this driver, but will not reach full power.
The fiber-coupled LEDs sold above are compatible with the LED2 Terminal.
Small Signal Bandwidth: Modulation not exceeding 20% of full scale current. The driver accepts other waveforms, but the maximum frequency will be reduced.
The M565F3 and M595F2 LEDs produce light by stimulating emission from phosphor, which limits their modulation frequency range. These LEDs may not turn off completely when modulated above 10 kHz at duty cycles below 50%.

Ø1.25 mm, 6.4 mm Long Stainless Steel Ferrules (For Multimode Fibers Only)

Zoom

Item #	Bore Size^a	Bore Size Tolerance	Compatible Fibers
SFLC127-10	Ø127 µm	+5/-0 µm	FG050UGA, FG050LGA, FG105UCA, FG105LCA and GIF Series
SFLC230-10	Ø231 µm	+4/-0 µm	FT200EMT, FT200UMT
SFLC270-10	Ø270 µm	+5/-0 µm	FG200UCC, FG200LCC
SFLC440-10	Ø440 µm	+5/-0 µm	FG365LEC, FG365UEC, FT400EMT, FT400UMT

Note that the bore size increases in these ferrules.

Stainless Steel Ferrule for Mating to LC/PC Connectors
Dimensions: 1.25 mm Outer Diameter x 6.4 mm Long
Bore Sizes from Ø127 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAL1 Mating Sleeve and ADAL3 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø1.25 mm stainless steel ferrules feature bore sizes from Ø127 µm to Ø440 µm. They are compatible with many of our multimode fibers. Stainless steel ferrules can be scored to increase the available surface area for the bonding agent in optogenetics applications. Please see the table to the right for a complete list of fibers compatible with these ferrules. These ferrules are compatible with many LC fiber components and the ADAL1 LC mating sleeve and ADAL3 interconnect.

Ø1.25 mm, 6.4 mm Long Ceramic Ferrules (For Single Mode or Multimode Fibers)

Zoom

Item #	Bore Size	Bore Size Tolerance	Compatible Fibers
CFLC126-10	Ø126 µm	+3/-0 µm	Single Mode Fiber^a
CFLC128-10	Ø128 µm	+3/-0 µm	FG050UGA, FG050LGA, FG105UCA, FG105LCA, and GIF Series
CFLC230-10	Ø230 µm	+5/-0 µm	FT200EMT, FT200UMT
CFLC270-10	Ø270 µm	+5/-0 µm	FG200UCC, FG200LCC
CFLC440-10	Ø440 µm	+10/-0 µm	FG365LEC, FG365UEC, FT400EMT, FT400UMT

Compatible with Ø125 µm cladding fiber.

Ceramic Ferrule for Mating to LC/PC Connectors
Dimensions: 1.25 mm Outer Diameter x 6.4 mm Long
Bore Sizes from Ø126 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAL1 Mating Sleeve and ADAL3 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø1.25 mm ceramic (zirconia) ferrules feature bore sizes from Ø126 µm to Ø440 µm. Ferrules with a Ø126 µm bore are compatible with our single mode fibers, while ferrules with a Ø128 µm to Ø440 µm bore are compatible with many of our multimode fibers. Please see the table to the right for a complete list of compatible fibers. These ferrules are compatible with many LC fiber components and the ADAL1 LC mating sleeve and ADAL3 interconnect.

Ø1.25 mm, 10.5 mm Long Ceramic Ferrules (For Single Mode and Multimode Fibers)

Zoom

Item #	Bore Size	Bore Size Tolerance	Compatible Fibers
CFX126-10	Ø126 µm	+3/-0 µm	Single Mode Fiber^a
CFX128-10	Ø128 µm	+5/-0 µm	FG050UGA, FG050LGA, FG105UCA, FG105LCA, and GIF Series
CFX230-10	Ø230 µm	+5/-0 µm	FT200EMT, FT200UMT
CFX270-10	Ø270 µm	+5/-0 µm	FG200UCC, FG200LCC
CFX440-10	Ø440 µm	+10/-0 µm	FG365LEC, FG365UEC, FT400EMT, FT400UMT

Compatible with Ø125 µm cladding fiber.

Ceramic Ferrule for Mating to LC/PC Connectors
Dimensions: 1.25 mm Outer Diameter x 10.5 mm Long
Length Useful for Easy Handling and Optogenetics Applications
Bore Sizes from Ø126 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAL1 Mating Sleeve and ADAL3 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø1.25 mm ceramic (zirconia) ferrules have similar compatibility to the CFLC ferrules sold above but are nearly twice as long. In optogenetics applications, this aids in handling and provides additional clearance when implanted alongside other neural recording devices. These ferrules feature bore sizes from Ø126 µm to Ø440 µm and are compatible with many of our single mode and multimode fibers. Please see the table to the right for a complete list of compatible fibers. These ferrules are compatible with many LC fiber components and the ADAL1 LC mating sleeve and ADAL3 interconnect.

Ø1.25 mm, 11.8 mm Long Ceramic Ferrules with Flange (For Single Mode and Multimode Fibers)

Zoom

Item #	Bore Size	Bore Size Tolerance	Compatible Fibers
CFLF126-10	Ø126 µm	+3/-0 µm	Single Mode Fiber^a
CFLF128-10	Ø128 µm	+3/-0 µm	FG050UGA, FG050LGA, FG105UCA, FG105LCA, and GIF Series
CFLF230-10	Ø230 µm	+5/-0 µm	FP200ERT, FP200URT FT200EMT, FT200UMT
CFLF440-10	Ø440 µm	+10/-0 µm	FG365LEC, FG365UEC, FP400ERT, FP400URT FT400EMT, FT400UMT

Compatible with Ø125 µm cladding fiber.

Ceramic Ferrule with Flange for Mating to LC/PC Connectors
Dimensions: 1.25 mm Outer Diameter (Ferrule Only) x 11.8 mm Long (Ferrule with Flange)*
Length Useful for Easy Handling and Optogenetics Applications
Bore Sizes from Ø126 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAL1 Mating Sleeve and ADAL3 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø1.25 mm ceramic (zirconia) ferrules feature a nickel plated brass flange and are available with bore sizes from Ø126 µm to Ø440 µm. The flange provides a simple, robust way to interface the ferrule with tubing. The flange also helps to cement the ferrule in place inside collimation assemblies, making flanged ferrules useful when building fiber pigtail subcomponents for applications such as pigtailed collimators, fiber isolators, and benchtop lasers. The extended length of these ferrules allows for easy handling, making them useful in optogenetics applications by providing additional clearance when implanted alongside other neural recording devices. Ferrules with a Ø126 µm bore are compatible with our single mode fibers, while ferrules with a Ø128 µm to Ø440 µm bore are compatible with many of our multimode fibers. Please see the table to the right for a complete list of compatible fibers. These ferrules are compatible with many LC fiber components and the ADAL1 LC mating sleeve and ADAL3 interconnect.

*The total length of the flanged ferrule is 11.8 mm. The length of the ceramic ferrule is 4.9 mm, and the length of the nickel plated brass flange is 6.9 mm.

Ø2.5 mm, 12.7 mm Long Stainless Steel Ferrules (For Multimode Fibers Only)

Zoom

Item #	Bore Size^a	Bore Size Tolerance	Compatible Fibers
SF230-10	Ø230 µm	+10/-0 µm	FT200EMT, FT200UMT
SF270-10	Ø270 µm	+10/-0 µm	FG200UCC, FG200LCC
SF340-10	Ø340 µm	+10/-0 µm	FT300EMT, FT300UMT
SF440-10	Ø440 µm	+10/-0 µm	FG365LEC, FG365UEC, FT400EMT, FT400UMT

Note that the bore size increases in these ferrules.

Stainless Steel Ferrules for Mating to FC/PC, SC/PC, and ST^®*/PC Connectors
Dimensions: 2.5 mm Outer Diameter x 12.7 mm Long
Bore Sizes from Ø230 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAF1 Mating Sleeve and ADAF2 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø2.5 mm stainless steel ferrules feature bore sizes from Ø230 µm to Ø440 µm that are compatible with many of our multimode fibers. Stainless steel ferrules can be scored to increase the available surface area for the bonding agent in optogenetics applications. Please see the table to the right for a complete list of fibers compatible with these ferrules. These ferrules are compatible with many FC/PC, SC, and ST fiber components as well as the ADAF1 mating sleeve and ADAF2 interconnect.

*ST^® is a registered trademark of Lucent Technologies, Inc.

Ø2.5 mm, 10.5 mm Long Ceramic Ferrules (For Single Mode or Multimode Fibers)

Zoom

Item #	Bore Size	Bore Size Tolerance	Compatible Fibers
CF126-10	Ø126 µm	+1/-0 µm	Single Mode Fiber^a
CF128-10	Ø128 µm	+4/-1µm	FG050UGA, FG050LGA, FG105UCA, FG105LCA, and GIF Series
CF230-10	Ø231 µm	+10/-0 µm	FT200EMT, FT200UMT
CF270-10	Ø270 µm	+10/-0 µm	FG200UCC, FG200LCC
CF340-10	Ø340 µm	+10/-0 µm	FT300EMT, FT300UMT
CF440-10	Ø440 µm	+10/-0 µm	FG365LEC, FG365UEC, FT400EMT, FT400UMT

Compatible with Ø125 µm cladding fiber.

Ceramic Ferrule for Mating to FC/PC, SC/PC, and ST^®*/PC Connectors
Dimensions: 2.5 mm Outer Diameter x 10.5 mm Long
Bore Sizes from Ø126 µm to Ø440 µm
All Ferrules Have a Flat End Face
Sold in Packs of 10
Compatible with our ADAF1 Mating Sleeve and ADAF2 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø2.5 mm ceramic (zirconia) ferrules feature bore sizes from Ø126 µm to Ø440 µm. Ferrules with a Ø126 µm bore are compatible with our single mode fibers, while ferrules with Ø128 µm to Ø440 µm bores are compatible with many of our multimode fibers. Please see the table to the right for a complete list of compatible fibers. These ferrules are compatible with many FC/PC, SC, and ST fiber components as well as the ADAF1 mating sleeve and ADAF2 interconnect.

*ST^® is a registered trademark of Lucent Technologies, Inc.

Based on your currency / country selection, your order will ship from Newton, New Jersey

+1 Qty Docs Part Number - Universal Price Available

CF126-10 Customer Inspired! Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for SM Fiber, Ø126 µm Bore Size, 10 Pack

$23.16

3-5 Days

CF128-10 Customer Inspired! Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for MM Fiber, Ø128 µm Bore Size, 10 Pack

$25.07

3-5 Days

CF230-10 Customer Inspired! Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for MM Fiber, Ø231 µm Bore Size, 10 Pack

$60.59

3-5 Days

CF270-10 Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for MM Fiber, Ø270 µm Bore Size, 10 Pack

$61.48

3-5 Days

CF340-10 Customer Inspired! Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for MM Fiber, Ø340 µm Bore Size, 10 Pack

$62.67

3-5 Days

CF440-10 Ø2.5 mm, 10.5 mm Long Ceramic Ferrule for MM Fiber, Ø440 µm Bore Size, 10 Pack

$64.45

3-5 Days

* Orders for in-stock bare fiber placed by 3:00 PM ET are eligible for same-day shipment.

Ø2.5 mm, 16.0 mm Long Ceramic Ferrules with Flange (For Single Mode Fibers Only)

Zoom

Item #	Bore Size	Bore Size Tolerance	Compatible Fibers
CFAF126-10	Ø126 µm	+1/-0 µm	Single Mode Fiber^a

Compatible with Ø125 µm cladding fiber.

Ceramic Ferrule with Flange and Conical Tip
Dimensions: 2.5 mm Outer Diameter (Ferrule Only) x 16.0 mm Long (Ferrule with Flange)*
Length Useful for Easy Handling and Optogenetics Applications
Ø126 µm Bore Size
Conical Tip Allows for APC Polishing After Fiber Installation
Sold in Packs of 10
Compatible with our ADAF1 Mating Sleeve and ADAF2 Interconnect
Contact Tech Support for Custom Length or Bore Size

These Ø2.5 mm ceramic (zirconia) ferrules have a bore size of Ø126 µm and feature a nickel plated brass flange. They feature a conical tip that allows for APC polishing after fiber installation. Extra material at the tip accounts for height lost when the angle is ground onto the facet, and a large chamfer minimizes the amount of material removed when angle polishing.

The flange provides a simple, robust way to interface the ferrule with tubing. The flange also helps to cement the ferrule in place inside collimation assemblies, making flanged ferrules useful when building fiber pigtail subcomponents for applications such as pigtailed collimators, fiber isolators, and benchtop lasers. The 4-slotted FC-flange on these 2.5 mm ferrules also allows them to be used in tunable FC-connector housings. Additionally, these flanged ferrules feature an extended length, allowing for easy handling and making them useful in optogenetics applications by providing additional clearance when implanted alongside other neural recording devices. These ferrules are compatible with our single mode fibers and APC fiber components, as well as the ADAF1 mating sleeve and ADAF2 interconnect.

*The total length of the flanged ferrule is 16.0 mm. The length of the ceramic ferrule is 8.1 mm, and the length of the nickel plated brass flange is 7.9 mm.