Accessory Mounting Posts for Optical Table Workstations
![](https://punchout.thorlabs.com/Images/GuideImages/8922_AccessoryMountingPosts_2.jpg)
PSY161
Post for Mounting Accessories on the Lean Bars of the Optical Table Frame
TA2
Attach PSY161 or PSY162 Posts to the Work Surface
DP14A
Ø1.5" Damped Post for Mounting Accessories to the Work Surface
- Mount Accessories to the Workstation's Lean Bars, Overhead Shelving Unit, or Work Surface
- Multiple Options Provide Customization
- Sturdy Steel Contruction
TFA4
Post-Mounting Adapter for the Optical Table Frame Overhead Shelf Unit
![](../../images/loading-red.gif)
Please Wait
Mounting Accessories to the Optical Table Workstation Lean Bars
Many of Thorlabs' optical table workstation accessories use Ø1.5" Mounting Posts to attach to the lean bars of the frame including our overhead shelves, instrument shelves, breadboard brackets, component trays, monitor mount, and overhead storage trays. They attach to the lean bars of the frame using M16 bolts that come in through the bottom of the lean bars via the available Ø17 mm (Ø0.67") through holes (number of holes available depends on lean bar length). They come in two lengths, 750 mm (29.5") or 1000 mm (39.4"), increasing the variety of mounting options available. Please note that many of our accessories can be purchased with posts. Of the accessories listed above, all can be purchased with 750 mm posts except for the monitor mount.
Mounting Accessories to the Optical Table Workstation Overhead Shelving Unit
The TFA4 Post Adapter facilitates the attachment of post-mounted accessories to the optical table frame overhead shelving unit. This adapter attaches to the uprights of the shelving unit and includes a 75 mm (2.95") long Ø1.5" post for mounting our monitor mount, instrument shelves, breadboard brackets, or component trays to the overhead shelf frame.
Mounting Accessories to the Work Surface (Optical Table)
We also offer our TA2 adapters for attaching our Ø1.5" mounting posts to a breadboard or optical table surface. If additional damping of vibrations is required for an accessory mounted on the work surface, we offer Ø1.5" damped mounting posts. These are available in 8" (203.2 mm) and 14" (355.6 mm) heights.
Optical Table Workstation Accessories | |||||||||
---|---|---|---|---|---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Shelving | Computer Accessories |
Lighting | Power Strips | Storage | 19" Rack Chassis |
Mounting Posts |
Lean Bars | Wrist Rest | Vibration Isolation |
Posted Comments: | |
No Comments Posted |
![Back to Top Back to Top](https://punchout.thorlabs.com/images/arrow_Vert.gif)
- Two Lengths: 750 mm (29.5") or 1000 mm (39.4")
- Ideal for Monitor Mounts, Overhead Shelves, or Instrument Shelves
- M16 Bolt Attaches to Lean Bars of the Optical Table Workstation
These 750 mm (29.5") and 1000 mm (39.4") tall posts are used to attach accessories, such as our Monitor Mount, Overhead Shelves, or Instrument Shelves, to the lean bars of our optical table workstations. Each post has a diameter of 1.5" and is attached to the Ø17 mm (Ø0.67") through holes of the lean bars using the supplied M16 bolts.
We offer the TA2 Post Adapter below for mounting these posts onto the optical table surface.
![Back to Top Back to Top](https://punchout.thorlabs.com/images/arrow_Vert.gif)
- Post Adapter for the TFS201 and TFS251 Overhead Shelving Units
- Compatible with Monitor Mounts, Instrument Shelves,
Breadboard Brackets, or Component Trays - Strong, Steel Construction
- Attaches Directly to the Overhead Shelf Unit Uprights via
Included M8 Bolts
The TFA4 Post Adapter allows you to attach post-mounted accessories to the optical table frame overhead shelving unit. As shown in the photo to the right, the adapter is bolted to one of the uprights using two supplied M8 bolts. Once connected, the 75 mm (2.95") long Ø1.5" post can be used to attach various accessories, such as our monitor mount, instrument shelves, breadboard brackets, or component trays.
![Back to Top Back to Top](https://punchout.thorlabs.com/images/arrow_Vert.gif)
The TA2 Post Adapter allows a Ø1.5" mounting post to be fitted to an optical table or breadboard. With this adapter, post-mounted optical table workstation accessories such as monitor mounts, keyboard holder, and shelves can compliment nearly any standard breadboard or table, increasing usable workspace.
The adapter features elongated slots and is supplied with a replacement post stud, together with M6 and 1/4"-20 bolts to fit to either metric or imperial work surfaces. Two adapters are necessary to attach the two posts required for fitting an overhead shelf. The adapter is fitted to the mounting posts via an M16 counterbore.
![Back to Top Back to Top](https://punchout.thorlabs.com/images/arrow_Vert.gif)
![DP14A Top Cap](https://punchout.thorlabs.com/images/TabImages/Damped_Post_A1-200.jpg)
Click to Enlarge
The BD8A and DP14A Feature an Engraved Top Cap Indicating the Item # as well as a 1/4"-20 Tapped Hole
- Dynamic Damping Provides Fast Ring Down
- Nickel-Plated Steel with Matte Finish for Long Life
- Permanent Mounting Base with Four 1/4" (M6) Counterbores
- 8" and 14" Long Versions Available
These dynamically damped Ø1.5" mounting posts provide a vibration-limiting alternative to using a Ø1.5" mounting post with a TA2 adapter. These posts feature optimized damping that outperforms other damped post designs. Damped posts are ideal for use in applications where vibrations must be limited, such as beam steering and imaging. Ring down testing was performed on both of these posts. The results for the DP8A are shown below, for DP14A results and information about the testing click here.
![DP8A Impulse Test](https://punchout.thorlabs.com/images/TabImages/DP8A_Impulse_550.gif)
Click to Enlarge
A 1.1 lb (0.50 kg) load was mounted approximately 2" from the top of the Post. The post was then struck approximately 0.5" from the top with an impulse hammer, oscillations were measured with an accelerometer mounted to the top of the post, and the time for the amplitude to return to 0 was noted. For complete test results please click here.
Our Dynamically Damped Posts are fabricated from steel with a nickel-plated matte finish and utilize internal damping weights containing no lead. They have an engineered passive vibration dampening design. An internal suspension system allows weights inside the post to move independently from the post's outer body, thus allowing vibrational energy to quickly be absorbed and dissipated. The permanently attached mounting base has four 1/4" (M6) counterbores, appropriately spaced for securing it to breadboards with taps on 1.00" (25.0 mm) centers. The top cap is engraved with the part number for identification. The posts also feature a top-located 1/4"-20 (M6) tapped hole to allow components to be secured to the top of the post.
Item # | DP8A(/M) | DP14A(/M) |
---|---|---|
Damping Time Under Specified Test Conditionsa |
30 ms [1.1 lb (0.50 kg) Load, 2" from the Top of the Post] |
500 ms [3.6 lb (1.6 kg) Load, 2" from the Top of the Post] |
Fundamental Frequency | 780 Hz | ~200 Hz |
Length | 8" (203.2 mm) | 14" (355.6 mm) |
Weight | 1.56 kg (3.44 lbs) | 2.4 kg (5.3 lbs) |
Top-Located Tapped Hole | 1/4"-20 (M6) 0.27" (6.9 mm) Deep |
1/4"-20 (M6) 0.33" (8.4 mm) Deep |
Mounting | Permanent Mounting Base with Four 1/4" (M6) Counterbores for Securing to Breadboards with 1.00" (25.0 mm) Hole Spacing |
![Back to Top Back to Top](https://punchout.thorlabs.com/images/arrow_Vert.gif)
![Overhead Shelf Clamp](https://punchout.thorlabs.com/images/tabimages/Breadboard_Post_Adapter_A1-150.jpg)
Click to Enlarge
Locking Clamp Positioned Under Our PSY321 Breadboard Mounting Bracket, Holding it in Place and Allowing for Free Rotation of the Bracket
- Retain the Position of Ø1.5" Post Mounted Accessories
- Hinged Clamp Design Allows for Installation Without Removing Existing Shelves
Thorlabs PSY322 Hinged Locking Clamps are the ideal solution for preventing the unwanted movement of accessories along the axis of the post. Locking the clamp in place (5 mm hex key included) directly under a post-mounted accessory, as shown to the right, prevents the accessory from sliding down the post when it is loosened for adjustments. This also allows mounted shelving or brackets to be freely rotated around the axis of the post to a needed position at any time.