Compact Quick-Connect Goniometric Stages with Crossed-Roller Bearings


  • ±8° Pure Rotational Motion About a Fixed Point Above the Stage
  • Vernier Scale Provides 10 arcmin Resolution
  • Integrated 2" Dovetails for Multi-Axis Construction
  • Crossed-Roller Bearings for High Load Capacity,
    Rigidity, and Stiffness

XRNG1

Single-Axis,
74 mm to Point of Rotation

XRNG2

Single-Axis,
50 mm to Point of Rotation

XRNG-K1

Dual-Axis,
50 mm to Point of Rotation,
±8° / ±8° Rotation

All goniometers feature
a fixed point of rotation
above the stage platform.

Front View

Back View,
Shown with Adjuster
Knob Removed

Related Items


Please Wait
Item # XRNG2(/M) XRNG1(/M) XRNG-K1(/M)
Distance from Top Surface
to Point of Rotation
50.0 mm
(1.97")
74.0 mm
(2.91")
50.0 mm
(1.97")
Rotation Range ±8° ±8° / ±8°
Vernier Scale Resolution 10 arcmin (0.167°)
Adj. Knob Revolution 0.9°/rev (0.015 rad/rev)
Load Capacity 3.5 lbs (1.59 kg) 2.8 lbs (1.25 kg)
Bearing Type Crossed-Roller Bearings
Platform
Mounting Features
8-32 (M4 x 0.7), 5.08 mm Deep (2 Places)
1/4"-20 (M6 x 1.0), 7.6 mm Deep (7 Places)
2" Quick-Connect Dovetails
Platform Size 2.00" x 2.00" (50.7 mm x 50.7 mm)
Platform Height
(On Breadboard)
1.02" (26.0 mm) 1.97" (50.0 mm)
Base Dimensions 3.35" x 2.01" (85.0 mm x 51.0 mm)a
Base Mounting Features 2" Quick-Connect Dovetails
Four Mounting Slots for 1/4"-20 (M6) Cap Screws
Weight (Mass) 0.75 lbs (0.34 kg) 1.5 lbs (0.68 kg)
  • Note that the overall dimensions of the XRNG-K1(/M) kit are greater than a single stage.

Click to Enlarge

View Imperial Product List
Item #QtyDescription
XRNG11Quick-Connect Goniometer, 74.0 mm to Point of Rotation, ±8° Adjustment, Imperial
XRN25-RC31Fixed Stop Rail Carrier for Stages with 2" Dovetails, 8-32 Taps and 1/4" Counterbored Slot
PH11Ø1/2" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 1"
TR11Ø1/2" Optical Post, SS, 8-32 Setscrew, 1/4"-20 Tap, L = 1"
RSP11Rotation Mount for Ø1" (25.4 mm) Optics, 8-32 Tap
NLC011Ø1" Mounted β-BBO Crystal, 0.15 mm Thick, θ = 30.5°, 680 - 900 nm Fund., 340 - 450 nm SHG
View Metric Product List
Item #QtyDescription
XRNG1/M1Quick-Connect Goniometer, 74.0 mm to Point of Rotation, ±8° Adjustment, Metric
XRN25-RC3/M1Fixed Stop Rail Carrier for Stages with 2" Dovetails, M4 x 0.7 Taps and M6 Counterbored Slot
PH20/M1Ø12.7 mm Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L=20 mm
TR20/M1Ø12.7 mm Optical Post, SS, M4 Setscrew, M6 Tap, L = 20 mm
RSP1/M1Rotation Mount for Ø1" (25.4 mm) Optics, M4 Tap
NLC011Ø1" Mounted β-BBO Crystal, 0.15 mm Thick, θ = 30.5°, 680 - 900 nm Fund., 340 - 450 nm SHG
β-BBO Crystal Mounted on Goniometer Stage

Features

  • Pure Rotational Motion About a Virtual Point
  • Anti-Backlash Leadscrew Drive and Removable Adjuster Knob
  • Crossed-Roller Bearings for High Load Capacity, Rigidity, and Stiffness
  • Dual-Axis Versions Available
  • Quickly Connect Stages and Accessories Using 2" Dovetails
    • See the Quick-Connect Stages Tab for Complete Line of Components

Thorlabs' XRNG Series Goniometers (or goniometric stages) provide ±8° of precise rotation about a fixed point in space. These goniometers use steel crossed-roller bearings to support precision motion and high load capacities. The top and bottom plates are machined from cast tool and jig aluminum for minimal internal stress and improved stability. The anti-backlash leadscrew drive and a vernier scale provide accurate and repeatable positioning. Stage rotation can be locked via a lock plate that accepts a 5/64" (2.0 mm) hex key or ball driver. The adjuster knob can be removed by loosening the setscrew on its shaft using a 0.05" hex key, reducing the overall length of stage for constrained setups. With the knob removed, the drive shaft can be actuated using a 5/64" (2.0 mm) hex key.

The distance from the mounting surface to the point of rotation is designed so that an XRNG2(/M) may be stacked on top of an XRNG1(/M) stage and both stages will rotate about the same point. The XRNG-K1(/M) dual-axis kit consists of two such complementary stages which must be connected by the user. The stages may be mounted directly to a table or breadboard, onto a baseplate, or onto another XRN series compact stage. Refer to the table to the right and to the diagrams below for details.

The top and bottom of each stage feature quick-connect dovetails (as shown in the lower right image) that allow for the construction of multi-axis systems without the need for additional hardware. The stages are secured by a single dovetail locking mechanism that can be actuated with a 3/16" (5 mm) hex key. The 2" dovetails on our XRNG series stages are directly compatible with the dovetails on the stages shown in the selection guide below. Additional functionality is provided by a complete line of accessories that include multi-axis assembly kits, rail carriers, a rotation adapter, and rails. An adapter plate is also available for mounting these compact stages with an integrated 2" dovetail onto translation and rotation stages with a 3" dovetail. For more information about our quick-connect construction components, see the Quick-Connect Stages tab.

Note: Using mounting hardware that exceeds the tap depth of the mounting holes will damage the stage. Before mounting components onto the goniometers, please review the mounting hole tap depths listed in the table above and on the support documents, accessible by clicking on the red Docs (docs icon) icon next to each Item # below.


Click to Enlarge

The 2" female dovetails on the bottom of the stage mate with the male dovetails on another stage to form multi-axis configurations. The left female dovetail is on a retractable clamping arm, allowing stages to be dropped into place.

Reading a Vernier Scale on a Linear Main Scale

Vernier scales are typically used to add precision to standard, evenly divided scales (such as the scales on Thorlabs' rotation, goniometric, or translation mounts). A vernier scale has found common use in many precision measurement instruments, the most common being calipers and micrometers. The vernier scale uses two scales side-by-side: the main scale and the vernier scale. The direct vernier scale has a slightly smaller spacing between its tick marks owing to the vernier scale having N ticks for every N - 1 ticks on the main scale. Hence, the lines on the main scale will not line up with all the lines on the vernier scale. Only one line from the vernier scale will match well with one line of the main scale, and that is the trick to reading a vernier scale.

Figures 1 through 3 show a linear vernier scale system for three different situations. In each case, the scale on the left is the main scale, while the small scale on the right is the vernier scale. When reading a vernier scale, the main scale is used for the gross number, and the vernier scale gives the precision value. In this manner, a standard ruler or micrometer can become a precision instrument.

The 0 on the vernier scale is the "pointer" (marked by a red arrow in Figures 1 - 5) and will indicate the main scale reading. In Figure 1 we see the pointer is lined up directly with the 75.6 line. Notice that the only other vernier scale tick mark that lines up well with the main scale is 10. Since the pointer lines up with the main scale’s 75.6, the reading from Figure 1 is 75.60 (in whatever units the instrument measures).

That is essentially all there is to reading a vernier scale. It's a very straightforward way of increasing the precision of a measurement instrument. To expound, let’s look at Figure 2. Here we see that the pointer is no longer aligned with a line on the main scale, but instead it is slightly above 75.6 and below 75.7; thus, the gross measurement is 75.6. The first vernier line that coincides with a main scale line is the 5, shown with a blue arrow. The vernier scale gives the final digit of precision; since the 5 is aligned to the main scale, the precision measurement for Figure 2 is 75.65.

Since this vernier scale is 10% smaller than the main scale, moving the vernier scale by 1/10 of the main scale will align the next vernier marking. This asks the obvious question: what if the measurement is within the 1/10 precision of the vernier scale? Figure 3 shows just this. Again, the pointer line is in between 75.6 and 75.7, yielding the gross measurement of 75.6. If we look closely, we see that the vernier scale 7 (marked with a blue arrow) is very closely aligned to the main scale, giving a precision measurement of 75.67. However, the vernier scale 7 is very slightly above the main scale mark, and we can see that the vernier scale 8 (directly above 7) is slightly below its corresponding main scale mark. Hence, the scale on Figure 3 could be read as 75.673 ± 0.002. A reading error of about 0.002 would be appropriate for
this instrument.

Figure 1: Vernier scale measuring 76.0
Click to Enlarge

Figure 1: An example of how to read a vernier scale. The red arrow indicates what is known as the pointer. Since the tick mark labeled 10 on the vernier scale aligns with one of the tick marks on the main scale, this vernier scale is reading 75.60 (in whatever units the instrument measures).
Figure 1: Vernier scale measuring 76.0
Click to Enlarge

Figure 2: The red arrow indicates the pointer and the blue arrow indicates the vernier line that matches the main scale. This scale reads 75.65.
Figure 1: Vernier scale measuring 76.0
Click to Enlarge

Figure 3: The red arrow indicates the pointer, and the blue arrow indicates the vernier line that matches the main scale. This scale reads 75.67 but can be accurately read as
75.673 ± 0.002.

 

Reading a Vernier Scale on a Rotating Main Scale

The vernier scale may also be used on rotating scales where the main scale and vernier scale do not share units. Figures 4 and 5 show a vernier scale system for two different situations where the main scale is given in degrees and the vernier scale has ticks every 5 arcmin (60 arcmin = 1°). In each case, the scale on the top is the main scale, while the small scale on the bottom is the vernier scale.

In Figure 4 we see the pointer is lined up directly with the 341° line. Notice that the only other vernier scale tick marks that line up well with the main scale are ±60 arcmin. Since the pointer lines up with the main scale at 341°, the reading from Figure 4 is 341.00°.

There are two ways to determine the reading if the zero on the vernier scale line is between two lines of the main scale. For the first method, take the line on the left side of the pointer on the vernier scale and subtract that value (in arcmin) from the value on the main scale that is to the right on the main scale. As an example, in Figure 5 the vernier pointer is between 342° and 343°; using the left blue arrow of the vernier scale results in 343° - 15 arcmin = 342.75°. The second method is to take the reading from the blue arrow on the right side of the vernier pointer and add that value to the lower value from the main scale; reading the right blue arrow in Figure 5 results in 342° + 45 arcmin = 342.75°.

As we've seen here, vernier scales add precision to a standard scale measurement. While it takes a bit of getting used to, with a little practice, reading these scales is fairly straightforward. Vernier scales, whether they are direct or retrograde*, are read in the same fashion.

*A retrograde vernier scale has a larger spacing between its tick marks with N ticks for every N + 1 ticks on the main scale.

Figure 1: Vernier scale measuring 341.00°.
Click to Enlarge

Figure 4: An example of a vernier scale where the main scale and the vernier scale are in different units (degrees and arcmins, respectively). The red arrow indicates the pointer. This scale reads 341.00°.
Figure 2: Vernier scale measuring 342.75°.
Click to Enlarge

Figure 5: The red arrow indicates the pointer and the blue arrows give the precision value from the vernier scale.
This scale reads 342.75°.

Posted Comments:
No Comments Posted

Build Multi-Axis Configurations

Vertical Rotation Translation Stage
Click for Details

Z-axis assembly kits allow stages to be mounted in vertical orientations.

Quick-Connect Dovetails

Quick Connect Translation Stages
Click to Enlarge
The female dovetails on the bottom of one stage mate with the male dovetails on another.

XR & XRN Dovetail Stages and Accessories

Our XR series manual stages feature quick-connect dovetails that allow for the construction of multi-axis systems without the need for additional hardware. The common dovetail feature with a single locking clamp makes it quick and simple to swap parts in and out while preserving excellent orthogonality.

Our selection of products with a quick-connect dovetail includes:

  • Linear Translation Stages:
    • Stackable 1-Axis Stages
    • Pre-Assembled 2- and 3-Axis Configurations
  • Rotational Stages:
    • 360° Flat Rotation
    • Tip/Tilt Goniometers
  • Adapters:
    • Z-Axis Assembly Kits
    • Parallel and Perpendicular Mounting between 2" and 3" Dovetails
  • Rail Accessories:
    • Stationary Mounting Platforms
    • Rail Component Positioners
  • Base Plates and Rails

Most items are available in compact (2" dovetail) and full-size (3" dovetail) varieties. Adapters are available to interface between the two sizes. See the tables below for all available options.

Linear Translation Stages
Click Photo to Enlarge XRN Stages XR Stages XRN Stages
Items Compact 25 mm Stages Compact 9 mm Vertical Stage Full-Size 25 mm Stages Full-Size 50 mm Stages 14 mm Vertical Stage
Motion X, Y, Z, XY, XZ, YZ, XYZ Z (Vertical) X, Y, Z, XY, XZ, YZ, XYZ X, Y, Z, XY, XZ, YZ, XYZ Z (Vertical)
Quick-Connect Dovetail 2" Dovetail 3" Dovetail
Additional Features info info info info info

 

Rotation and Goniometric Stages
Click Photo to Enlarge
Items Compact Rotation Stage Compact Goniometric Stages Full-Size Rotation Stage
Motion 360° Rotation ±8° Tip/Tilt About Fixed Point Above Stage 360° Rotation
Quick-Connect Dovetail 2" Dovetail 3" Dovetail
Additional Features info info info

 

Dovetail Accessories
Mounting Platforms XRN Platforms XR Platforms
2" Mounting Platforms 3" Mounting Platforms
Rail Positioners Rail Positioner
2" Rail Positioners 3" Rail Positioners
Back to Top

Goniometric Stages


Click for Details

Mounting Features
This diagram shows a single-axis goniometric stage; dual-axis stages have the same mounting features. Dimensions in parentheses are for metric stages.

Click for Details

Goniometer Dimensions
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
XRNG2 Support Documentation
XRNG2Quick-Connect Goniometer, 50.0 mm to Point of Rotation, ±8° Adjustment, Imperial
$937.13
Lead Time
XRNG1 Support Documentation
XRNG1Quick-Connect Goniometer, 74.0 mm to Point of Rotation, ±8° Adjustment, Imperial
$937.13
Lead Time
XRNG-K1 Support Documentation
XRNG-K1Dual-Axis Quick-Connect Goniometer, 50.0 mm to Point of Rotation, Imperial
$1,874.25
Today
+1 Qty Docs Part Number - Metric Price Available
XRNG2/M Support Documentation
XRNG2/MQuick-Connect Goniometer, 50.0 mm to Point of Rotation, ±8° Adjustment, Metric
$937.13
Lead Time
XRNG1/M Support Documentation
XRNG1/MQuick-Connect Goniometer, 74.0 mm to Point of Rotation, ±8° Adjustment, Metric
$937.13
3 weeks
XRNG-K1/M Support Documentation
XRNG-K1/MDual-Axis Quick-Connect Goniometer, 50.0 mm to Point of Rotation, Metric
$1,874.25
3 weeks
Back to Top

Vertical Stage Assembly Kits

Vertical Goniometric Rotation Stage
Click for Details

XRNG2 Goniometer Mounted on XRNR1 Rotation Stage Using
XRN-XZ Kit
Vertical Goniometric Stage
Click for Details

XRNG2 Goniometer Mounted Vertically Using XRN-XZ Kit
and XRN-B1 Base Plate
  • Kits Consist of Angle Bracket and Mounting Plate
  • Support Vertical Mounting Configurations
  • Compatible with 2" Mating Dovetail Stages
    • Dovetail Clamp Screw has a Max Torque of 15 in•lbs

The XRN-XZ(/M) and XRN-YZ(/M) Assembly Kits enable vertical mounting of an XRNG Series Goniometric Stage. These assembly kits can be directly mounted onto a base plate or onto other stages with 2" mating dovetails, as illustrated in the photos to the right. When used to mount a goniometric stage vertically on a linear translation stage, the XRN-XZ kit positions the surface of the goniometer (at 0°) parallel to the direction of linear motion, while the XRN-YZ kit would orient the goniometric stage platform perpendicular to the direction of motion.

Each kit includes an angle bracket and a mounting plate. The female dovetail on the vertical stage attaches to one of the mounting plate's male dovetails. The mounting plate's other male dovetail is then mated to an arm of the angle bracket. The other arm of the angle bracket attaches to the base plate or horizontal stage.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
XRN-XZ Support Documentation
XRN-XZXZ Stage Assembly Kit for Stages with 2" Dovetails, 1/4"-20 Taps
$207.96
Today
XRN-YZ Support Documentation
XRN-YZYZ Stage Assembly Kit for Stages with 2" Dovetails, 1/4"-20 Taps
$210.89
Today
+1 Qty Docs Part Number - Metric Price Available
XRN-XZ/M Support Documentation
XRN-XZ/MXZ Stage Assembly Kit for Stages with 2" Dovetails, M6 x 1.0 Taps
$207.38
Today
XRN-YZ/M Support Documentation
XRN-YZ/MYZ Stage Assembly Kit for Stages with 2" Dovetails, M6 x 1.0 Taps
$210.89
Today
Back to Top

Mounting Adapters

Mounting Adapter Compatibility
Item # Orientation Top Component Bottom Component
XRN-A1 Perpendicular XRN25 Series
XRNV1 Series
XRNR1 Series
XRNG1 Series
XR25 Series
XR50 Series
XRV1 Series
XRR1 Series
XRN-A2 Parallel
  • XRN-A1 Adapter Enables Perpendicular Mounting of 2" Dovetail Components onto 3" Dovetail Components
  • XRN-A2 Adapter Enables Parallel Mounting of 2" Dovetail Components onto 3" Dovetail Components
  • Adapters Add 0.275" (7.0 mm) to the Overall Stacked Height of Components

These adapters enable mounting of quick-connect, crossed-roller bearing stages or accessories with a female 2" dovetail to components with a male 3" dovetail. The XRN-A1 adapter enables perpendicular mounting while the XRN-A2 enable parallel mounting.

To assemble, first loosen the dovetail locking screw on the end of the top stage or accessory. Position the adapter on the bottom stage or rail then align the top component on the adapter. Lastly, tighten the dovetail locking screw (maximum torque: 15 in•lbs) on the end of the top component until the entire assembly is secure. Please note that the deep-set screws in the sides of the adapter are not user adjustable.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
XRN-A1 Support Documentation
XRN-A1Perpendicular Mounting Adapter with Male 2" Dovetail and Female 3" Dovetail
$58.24
Today
XRN-A2 Support Documentation
XRN-A2Parallel Mounting Adapter with Male 2" Dovetail and Female 3" Dovetail
$115.27
Today
Back to Top

Stage Base Plate

Goniometric Stage Mounting Plate
Click to Enlarge

Stages can be mounted vertically using a vertical assembly kit and the XRN-B1 base plate.
  • 1.26" Long, 1/4" (M6) Counterbored Slots for Additional Mounting Flexibility
  • Orthogonal Male Dovetails for Two Stage Mounting Orientations
  • Compatible with 2" Mating Dovetail Stages

The XRN-B1(/M) baseplate offers additional mounting flexibility for coarse positioning of the XRNG series goniometric stages within a setup. Three 1.26" long, 1/4" (M6) counterbored slots allow for coarse translation adjustment of the stage. The orthogonal dovetails on the top of the base plate allow the stage to be mounted in two orientations. The middle slot is designed to be secured by two 1/4"-20 (M6) cap screws onto an optical table or breadboard, which allows the stage to be aligned with the table's or breadboard's hole pattern.

Vertical Stage Configuration
For situations where a vertically mounted rotation stage is needed, either the XRN-XZ or the XRN-YZ angle bracket (sold above) can be secured directly to the baseplate. This configuration is illustrated in the photo to the right and described in more detail in the Vertical Stage Assembly Kits section above.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
XRN-B1 Support Documentation
XRN-B1Base Plate for Stages with 2" Dovetails, Imperial Slot Spacing
$35.81
Today
+1 Qty Docs Part Number - Metric Price Available
XRN-B1/M Support Documentation
XRN-B1/MBase Plate for Stages with 2" Dovetails, Metric Slot Spacing
$35.81
Today